TIMBER FLOORS REPAIR

Most residential grade finishes require 3 days of drying time before any foot traffic is possible whether it be solvent-based or water-based. However, this is based on a specific condition of 25°C and less than 50% humidity. Under extremely moist and cold conditions the finish would need 1-2 days extra drying time. Furthermore, the drying time is only for the foot traffic and it differs in nature from full cure time/full oxidation period.

Full cure time - generally acknowledged as the earliest date furniture can be placed -  is one full week. 

Full oxidation period - generally regarded as the earliest date colour imperfections would settle - can range from 3 months to 6 months and has much greater variance between the types of timber and coating finishes.

Given the existing level is in good shape, we usually sand 0.5mm ~ 1mm timber off the top of the floor boards and most timber floors have a good 5-7mm top composition above the tongue and groove system. Hence, the maximum number of sanding possible on a newly laid down levelled timber floor would be 5-6 times, although it is always best to enquire sanders to inspect the floor for the possibility and affordability of sanding & polishing beforehand.

Preparation for floor sanding can be quite tiresome as you would need to remove furniture and cover up your valuables against the dust that sanding machines produce. Just keep in mind that no one can walk on the floor during the fine sanding process and polishing stage, and a further 3-4 days of drying time afterwards. It's always a good idea to make a list of things that you would need for a few days which you would have no access to the floors. Sometimes, there can be timber boards which require repairs prior to the sanding but this will be detailed out at the time of inspection for the quote.

Laminated floors and hybrid floors cannot be sanded. However, engineered boards and solid timbers can be sanded. Floating floors such as bamboo and pre-finished timber are most likely able to be sanded. Please take a good photo and send it to our team and we are happy to let you know the sandability of the timber floor you have!

In case of exterior decking, it is highly recommended that you refinish the deck using the same finish. Leave the hard and tedious sanding process to the sanders and save money by applying the coatings yourself. However, refinishing interior timber floors can be more difficult because they often require a thorough buffing before a coating can be applied. Don't worry if you mess up though, we can always fully sand the floor for you when it comes down to the worst.